Can toilet seats be different sizes?

Can toilet seats be different sizes?

Toilet seats don’t come in sizes, but they do come in two different shapes: round toilet seats and elongated toilet seats, each of which correspond to two different toilet bowl shapes. Round toilet seats are still the standard in most homes, and they’re the toilet seats you typically see most often.

Can you put a bigger toilet seat on a small toilet?

An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.

Do you measure a toilet seat for replacement?

Measuring up for a new toilet seat really is simple. You will need to take 4 measurements from your toilet: Length, width, height and distance between fixing holes. For length, place one end of your tape measure between the fixing holes and stretch out to the very front end of your toilet.

Are toilet seat fixing holes Standard?

Modern toilets have standard hole centres. Replacement toilet seat kits usually have adjustment to allow fitting to the older or non standard types as well. These are the key measurements that you need, although most seats are adjustable so that they will fit the most common toilet bowl shapes.

Is round or elongated toilet better?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

What is the benefit of an elongated toilet?

The elongated toilet is considered modern and stylish compared to the traditional round bowl. However, this toilet design might take up more space in your bathroom. That said, the elongated bowl benefits include more comfort, ease of cleaning, lower costs considering long-term benefits, and lower chances of clogging.

What are the standard dimensions of a toilet?

Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.

What are toilet sizes?

What is the difference between top fix and bottom fix toilet seats?

Types Of Toilet Seat Fittings Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.

Which toilet is better round or elongated?

How do you determine the size of a toilet seat?

Before buying a new one, use a tape measure to determine what size toilet seat will fit the bowl. First, find the bolts where the seat attaches to the bowl and measure the distance between them. The standard measurement is 5 1/2 inches. Measure the width of the bowl at its widest point.

How big are the bolts on a toilet seat?

Find the bolts where the toilet seat attaches to the bowl and measure the distance between them. For your reference, the standard measurement for US toilet seat bolts is 5.5 inches.

What’s the best way to install a toilet seat?

Loosen the nuts from the bolts by hand or with an adjustable wrench, turning counterclockwise. Remove the nuts from the bolts and washers, if they’re also attached. Remove the bolts and lift the old seat and its hinges from the toilet. Recycle the old seat and any parts, if possible.

How big of a hole do you need for a toilet seat?

Refer to the fit diagram below for exact specifications for fitting the bidet attachment to your fixture. Bolt holes must be between 5-1/4 inches and 8 inches apart. You will also need at least 3/4 inch clearance from the center of the bolt holes to the back of the toilet tank.