How do you open a Vaultz combination lock if you forgot the combination?

How do you open a Vaultz combination lock if you forgot the combination?

Without the correct combination, the only way into your box will be to remove the lock. This can be done by wedging a tool such as a flat head screwdriver between the lock and the box to pull the lock off. Vaultz is not responsible for lost or forgotten combinations.

How do you unlock a lock box without the code?

How to Open a Lockbox without the Code

1. Step 1: Insert the pick to the gap located at the first number. Insert the pick inside the gap located at the first number.
2. Step 2: Look for the loose spot in the wheel.
3. Step 3: Repeat the process for the remaining numbers until you open the lock.

How do you reset a 4 digit combination lock box?

Resetting your Combination Lock

1. Open the lock using the previous combination.
2. Insert the reset tool in the hole on the side of the lock.
3. Push the reset tool in and turn 90° in either direction.
4. Set wheels to your new combination.
5. Turn and remove the reset tool.
6. Record your combination in a safe place.

How do you reset a lock box code?

To do this, you simply use the reset lever and enter a new combination.

1. Open shutter door to access the combination dials and the release button.
2. Push the reset lever to the left and into the downward position.
3. Rotate the combination dials to the combination you want to use.

How do you open a Vaultz lock box with code?

Consequently, how do you open a Vaultz lock box with code? Set Lock Combination: Carefully cut and remove plastic safety tab. With latch still in the open position, SLIDE square button in towards numbered dials and HOLD it in this position. While holding the button, set each numbered dial one at a time.

How do I Reset my Vaultz combination code?

Resetting your personal combination code is an easy task that takes a few minutes to complete. Set the combination dials on the product to “000” if you have not yet set a personal combination code. Enter your current combination code to open the storage container if you had previously configured the combination lock.

How do I Reset my vault lock number?

Once you change the combination from 000 to your new number, you will be the only one who can access the box! To reset your combination lock open the box with your current combination and then follow step #3, after entering your current combination.

Where is the release button on a Vaultz case?

Slide the release button next to the combination dials in order to open the storage container. Remove the plastic safety tab from the combination dials if you are using the product for the first time.