Advice

How do you release rear brake shoes?

How do you release rear brake shoes?

Turn the adjuster screw to loosen the shoes.

  1. Locate the access hole on the outside of the brake drum.
  2. Turn the brake drum so that the access hole is aligned with the drum’s adjuster screw.
  3. Turn the adjuster screw counterclockwise until it comes to a halt.
  4. Pull the drum off of the wheel.

Why do Toyota Tacomas have rear drum brakes?

Why Toyota Decided to Put Rear Drums on Tacoma Models Cost: Drum brakes are cheaper to manufacture than disc brakes, and Toyota passes the savings along to its customers. On the Tacoma (and most unloaded pickups), the front brakes do 70%-80% of the braking. Off-Road Robustness: Drum brakes have an advantage off road.

Which way do you turn rear brake adjuster?

Turn the adjuster screw to loosen the shoes. Locate the access hole on the outside of the brake drum. Turn the brake drum so that the access hole is aligned with the drum’s adjuster screw. Turn the adjuster screw counterclockwise until it comes to a halt.

How much does it cost to replace rear brake shoes?

Per Axle. The average cost to replace brake shoes is between $199 – $275. Price generally varies based on the type of car you have the type of auto-shop you go to.

Why do tacomas still have rear drum brakes?

Why Toyota Decided to Put Rear Drums on Tacoma Models Cost: Drum brakes are cheaper to manufacture than disc brakes, and Toyota passes the savings along to its customers. On the Tacoma (and most unloaded pickups), the front brakes do 70%-80% of the braking.

How do you replace a rear brake shoe?

Install the new pin in the new rear brake shoe. Fit the bottom of the rear shoe in to the emergency brake arm and reinstall the clip, squeezing it with a pair of pliers to push it in place. Install the small adjusting arm and clip.

How do you replace front brake shoe on Toyota 4Runner?

Pull the brake shoe out and unhook the spring connected to the bottom of the shoe. Use a screwdriver to remove the clip holding the adjusting arm to the bottom of the shoe and pull the shoe off. Remove the washer and spring from the front shoe and pull it out. Remove the spring and adjusting arm from the front shoe. Figure 4.

Why do rear brakes wear out on a Tacoma 4Runner?

In general, the rear brakes on a Tacoma or 4Runner wear much more slowly than the front – after all, they are only providing a small fraction of overall braking, and as drum brakes wear more slowly anyway. However, eventually they need to be changed – whether due to wearing out or – perhaps more commonly – due to a rear axle seal leak.

When do you need to replace the brakes on a truck?

Brakes are a critical component of your truck’s performance and safety, but like everything else, they eventually wear out and need service, repair, or outright replacement.

Share this post