Table of Contents
How much chlorine do I put in a 10×30 pool?
Easyset / Inflatable Ring Pools
| Pool Size (Diameter x Depth) | Capacity (Gallons) | Chlorine Bleach (Oz / Cups) |
|---|---|---|
| 8′ x 30″ | 639 | 8.5oz / 1.25C |
| 10′ x 30″ | 1,081 | 14oz / 1.75C |
| 12′ x 30″ | 1,485 | 19.5oz / 2.5C |
| 12′ x 36″ | 1,779 | 23oz / 3C |
How much bleach do I add to my pool calculator?
If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
Can you use regular Clorox bleach in a swimming pool?
There’s a protocol when using Clorox® Regular Bleach2 for swimming pool disinfection. On an ongoing basis, if you super-chlorinate the pool with 100-200 oz. bleach per 10,000 gallons of water, in addition to regular chlorination, algae growth can be prevented.
How often should I add bleach to my pool?
Ideally, the chlorine value should be between 1 and 1.5 ppm. During the swimming season, we recommend checking these values twice a week. This can be done using a manual test kit, but there is also a digital version such as the Blue Connect Plus.
How long after putting chlorine in pool Can you swim?
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
How much bleach do you use to chlorinate a 15, 000 gallon pool?
For example, if you tested your swimming pools chlorine levels and determined that there was 2 ppm of active chlorine in 15,000 gallon pool and would like to raise it to 4 ppm you can use the chart above. It would take 62 ounces of bleach to raise the level by 2 ppm. KNOW YOUR CYA LEVELS
How much bleach should I put in my Intex pool?
That converts out to about 1,200 gallons of water which is roughly the same as a 10′ x 30″ round metal frame pool. According to the chart on this page, that takes about 2 cups of bleach to get you started.
What kind of bleach do you use in a wading pool?
Mix required amount of Clorox® Regular Bleach 2 with 2 gallons of water and scatter over surface of pool. Mix uniformly with pool water. Empty small pools daily.
How much chlorine should I add to my Pool?
If you’re trying to shock your pool, then you will need to add 1/2 gallon per 10,000 gallons of pool water to raise it to 5 ppm. On the other hand, if you are just raising your chlorine levels, 1/4 gallon per 10,000 gallons will suffice.