Users' questions

What is the difference between DIMM and DDR3?

What is the difference between DIMM and DDR3?

Different types of RAM come on different types of DIMM. The first DIMM was called SO-DIMM and had 72 pins, whereas DDR3 RAM has 240. DIMMs with different numbers of pins are incompatible with each other and cannot be installed in computers that are not designed for that specific type of RAM.

What does DIMM stand for?

dual in-line memory module
A DIMM or dual in-line memory module, commonly called a RAM stick, comprises a series of dynamic random-access memory integrated circuits. These modules are mounted on a printed circuit board and designed for use in personal computers, workstations, printers, and servers.

Is DIMM the same as RAM?

DIMM is a module that contains one or several random access memory (RAM) chips on a small circuit board with pins that connect it to the computer motherboard. The DIMM stores each data bit in a separate memory cell. DIMMs use a 64-bit data path, since processors used in personal computers have a 64-bit data width.

Is DIMM DDR3 or DDR4?

Physically, a DDR4 module, or dual in-line memory module (DIMM), looks very similar to a DDR3 DIMM. However, DDR4 has 288 pins compared with DDR3’s 240 pins; DDR4 SO-DIMMS have 260 pins instead of 204 in DDR3….How does DDR4 differ from DDR3 in appearance?

Item DDR3-1866 DDR4-3200
Peak transfer rate 14928 MB/s 25600 MB/s

Can I replace DIMM with DDR3?

Anyway the simple answer is yes DDR3 SDRAM will work with your motherboard, and in fact you already have DDR3 SDRAM installed.

What is difference between DIMM and Udimm?

When compared with registered memory, conventional memory is usually referred to as unbuffered memory or unregistered memory. When manufactured as a dual in-line memory module (DIMM), a registered memory module is called an RDIMM, while unregistered memory is called UDIMM or simply DIMM.

How do I know if my RAM is DIMM?

To determine whether the modules are DIMM or SODIMM, use these steps:

  1. Open Start.
  2. Type Command Prompt, right-click the top result and select the Run as administrator option.
  3. Type the following command to determine the memory form factor and press Enter:
  4. Under the FormFactor column, confirm the form factor information.

Can I use DDR3 RAM in DIMM slot?

All DDR3 sold for PC’s uses 240 pin DIMM’s (or 204 pin SO-DIMM’s for laptops. So SDRAM and DIMM are referring to slightly different things. Anyway the simple answer is yes DDR3 SDRAM will work with your motherboard, and in fact you already have DDR3 SDRAM installed.

Can you run DDR3 in a DDR4 slot?

A motherboard with DDR4 slots cannot use DDR3, and you can’t put DDR4 into a DDR3 slot. Here’s our guide to the best DDR4 RAM options in 2019. DDR4 operates at a lower voltage than DDR3. DDR4 normally runs at 1.2 volts, down from DDR3’s 1.5V.

Can I replace DDR3 with DDR3L?

DDR3L is pin-compatible with DDR3. DDR3L is a dual voltage capable memory SoDIMM, which supports operation at both 1.5 V and 1.35 V.

Can I use DDR3 RAM instead of DDR2?

This difference in notch position is also why you can’t use DDR3 RAM in a DDR2 system or install DDR2 RAM into a DDR3 slot (even though they have the same number of pins). In short, DDR2 and DDR3 RAM are not compatible with each other: If your motherboard has DDR2 RAM slots, then you can only use DDR2 RAM.

What does DDR3 and DDR2 mean?

While DDR2 memory can transfer data at up to 3200 MBps (megabytes per second), DDR3 memory supports maximum data transfer rates of 6400 MBps. This means computers with DDR3 memory can transfer data to and from the CPU much faster than systems with DDR2 RAM.

How is a DIMM different from a DDR?

Technically, there is no difference between DDR and DIMM, because DDR RAM is a type of DIMM. The difference between DDR and DIMM is something like the difference between a Ford Focus and a car. For example, if you are purchasing more RAM for your computer, you could buy a DIMM of DDR RAM. You could also buy a DIMM of DDR2 RAM or SDR RAM.

What is DQS in DDR3 SDRAM?

The differential data strobe (DQS, DQS#) is transmitted externally, along with data, for use in data capture at the DDR3L SDRAM input receiver. DQS is center-aligned with da-ta for WRITEs. The read data is transmitted by the DDR3L SDRAM and edge-aligned to the data strobes. Read and write accesses to the DDR3L SDRAM are burst-oriented.

Share this post