Table of Contents
Why does the fuse keep blowing in my washing machine?
When the fuse on your top-loading washer blows repeatedly, it is an indication that there is a problem with the lid switch. The fuse is connected to the lid switch which, in turn, tells the washer whether the lid is open or closed. Both the fuse and the lid switch should be replaced to solve the problem.
Why does my Bosch washing machine keep tripping the electric?
There are multiple causes which can result in a washing machine tripping the electrics, such as the motor, the heater, the supressor, a wire shorting out, or water leaking onto an electric part.
Why does my washing machine keep tripping the power?
The top reasons why a washing machine may trip your circuit breaker include a bad door latch assembly, a bad timer, or a faulty water level control switch. The motor brushes or motor control board could cause your circuit breaker to trip, as well.
How do I reset my Hisense washing machine?
First, you should perform a general reset of the machine. Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians.
What size fuse should be in a washing machine?
13A Fuse
Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown). For example: 13A Fuse – Washing machine, dishwasher, microwave, kettle, toaster, iron.
How do I fix my electric washer tripping?
We advise you to let your washing machine dry out for between 24 and 48 hours and then try again. If the problem is still there, check the door lock, as it may have a short circuit, and then replace it if necessary.
Where are the fuses on my washing machine?
One fuse sits in the power cord to the washing machine and will blow if a power surge reaches the washer. The other fuse sits in the lid switch on some machines; if the washer overheats or there is a power surge, the washer will not run again until the fuse in the switch is replaced. Check the home’s fuse box and inspect the laundry room fuse.
Why does my top loader washer keep blowing the fuse?
When the fuse on your top-loading washer blows repeatedly, it is an indication that there is a problem with the lid switch. The fuse is connected to the lid switch which, in turn, tells the washer whether the lid is open or closed. The switch is designed to intentionally blow the fuse if it is not working properly…
Why does my top load washing machine not start?
Top-load washing machines use a lid switch as a safety feature to only operate when the door is properly closed. If the door is closed, you’ll need to check the switch continuity with your multimeter. A negative test indicates the switch will need to be replaced.
Why does my washing machine keep tripping power off?
Overheating of the internal coils, creating a fault. Water leakage that runs onto the washing machine’s motor and trips the power off. Unplug your motor from its electrical connectors to see if the washing machine still trips the power off, then replace the part if the test is successful.