Table of Contents
How do I fix code 63 on Thermo King?
It indicates your Thermo King has a low engine oil level. To fix this issue, you need to refill your engine with oil. In case you recently filled your engine with oil, check the oil level sensor.
What is code 10 on Thermo King?
Thermo King Alarm Code 10: High Discharge Pressure.
What is code 63 on a Thermo King unit?
Re: code 63 thermoking code 63 (engine stopped, reason unknown) is a generally unhelpful code. Means the engine has stopped, most times this is fuel related (fuel pump, fuel solenoid) or it could be RPM sensor not reading correctly.
What is code 17 on a Thermo King?
Code 17 means Engine Failed to Crank when start is requested by the Microprocessor. Check Starter (unfortunately lately new thermoking starters often fail for some reason). Fuel pull in Solenoid failed or its circuit.
How do I clear my al52?
Alarm 52 is activated whenever the alarm list is determined to be full; at start-up or after recording an alarm in the list. Alarm 52 is displayed, but is not recorded in the alarm list. This alarm can be reset by clearing the alarm list. This can be done only if all alarms written in the list are inactive.
How do you reset the clock on a Thermo King?
Re: Thermo King Alarm Code Hold the TK logo key in until pretrip comes up on the display, press the select key until the year comes up, change the year with the up/down keys, press enter when correct, select to the next screen and repeat for date and time. Code 50 will self clear after the time is set.
How do I fix code 17 on my Thermo King?
What’s the most effective diagnostic procedure that should be followed for Alarm code 17?
- Check the battery for proper voltage, load test the battery to make sure that the battery internally is able to hold that charge.
- Check the fuse/relay interface circuit board for Fuse that controls the fuel shut off solenoid.