Blog

How much does it cost to replace a trumpet valve?

How much does it cost to replace a trumpet valve?

Professional Trumpet Repair and Cleaning

Repair Type Repair ID Cost
Repair Type Repair ID Cost
Trumpet Valve Repair VALVE $46.00-120.00
Trumpet Corks and Felts CF $10.00-35.00
Trumpet Solder Work SOLDER $20.00 per spot

How much does it cost to restore a trumpet?

Brass Repair Pricing Prices do NOT include parts.
Instrument General Service Overhaul Student Instruments
Trumpet or Cornet $60-$90 $550
Single Horn (3 Valves) $90-$125 $1,065
Double Horn (4 Valves) $60-$90 $1,540

Are trumpet parts interchangeable?

When it comes to replacing parts of your trumpet, basically every single part of it can be replaced. ☑ Don’t forget to always check that the replacement part is made for your trumpet’s brand and model when necessary.

Can a trumpet be refinished?

The instrument replating service is sometimes an option for refinishing your instrument. If the instrument was lacquered, the lacquer (or what is left of it) will then be removed. Many older instruments were finished with the old nitrocellulose lacquer; most modern instruments have a baked-on epoxy lacquer.

How much does it cost to clean a trumpet?

How much does it cost to have a trumpet cleaned? If you want to get your trumpet chemically cleaned, expect pay between $50 for a simple flush and $145 to also get an ultrasonic cleaning.

How much to re lacquer a trumpet?

How much does it cost to re-lacquer a trumpet? It will easily set you back $250 or more, depending on if you want them to strip off the original lacquer.

Why does my trumpet sound muffled?

While there are many possible causes, it’s most likely that one or more of the valves has been turned from its proper position, blocking the air flow. On either side of each valve are small, usually plastic parts, located just under the stem. These parts, called valve guides, hold the valve in place inside the trumpet.

How much does it cost to gold plate a trumpet?

Sounds too low. Gold plating an instrument may be $1,500+, and that’s for the plate itself, not any prep work. “The starting estimate to silver plate your ready to plate trumpet is $130, gold $1650, plus shipping & handling. The turn around time is 1-2 weeks depending on in house work load.

How much does it cost to make a trumpet?

Beginner trumpets frequently range in cost from $400 to $1,100. Intermediate, or step-up, trumpets often cost $1,500 to $2,500 and performer trumpets around $2,500 and up. There are many things that impact the overall cost of trumpet:

Where can I buy replacement parts for my trumpet?

Here we are going to stick to the basic replacement parts like small valve parts. If you need something bigger like the leadpipe replaced, you should take it to a repair shop and have a professional look at it. Unless you are an expert at welding, do not buy large parts online to do replacements on your own.

Where do I go to replace my trumpet leadpipe?

If you need something bigger like the leadpipe replaced, you should take it to a repair shop and have a professional look at it. Unless you are an expert at welding, do not buy large parts online to do replacements on your own. Most of the parts listed here are easily put on with a little common sense, and maybe your teacher’s help.

What to do if your trumpet is not working?

Most trumpets will have one precise way the guide goes in the valve case and if you do it wrong then you won’t be able to put air through the trumpet. You can often fix this by simply turning the valve until you clear a click, but I always recommend pulling the valve out and looking in the casing to see which way the guide should go.

Share this post