What is code P0800?

What is code P0800?

P0800 is a pass through code to notify the TCCM that it has faults. If the P0800 error code is stored in the vehicle, it indicates that the PCM has received an input data, indicating a malfunction in the transfer case control system which illuminates the malfunction indicator lamp.

What is transfer case control system?

Error Code P0800 is defined as Transfer Case Control System (MIL Request). The PCM calculates the automatic transmission shift strategy by using input signals from multiple sources, such as the engine, transmission, and transfer case sensors. The transfer case bolts the tailshaft housing of the transmission.

What is the code on a car called?

A vehicle identification number (VIN) (also called a chassis number or frame number) is a unique code, including a serial number, used by the automotive industry to identify individual motor vehicles, towed vehicles, motorcycles, scooters and mopeds, as defined in ISO 3779 (content and structure) and ISO 4030 (location …

What happens when transfer case motor goes bad?

If the transfer case fails during operation, the vehicle may be left permanently in neutral or the transfer case may bind. If the transfer case is malfunctioning electronically it can cause erratic shifts from high to low gear and from two-wheel drive to four-wheel drive.

How do you fix trouble code P0108?

The most common potential repairs to address the P0108 code are as follows: Verify the code with a scanner. Then reset the fault codes and perform a road test with a scanner attached with live data streaming. If the P0108 code comes back, then follow the test procedure.

What does engine code P0103 mean?

Mass Airflow
P0103 is the code for a problem with the Mass Airflow (MAF) Sensor having a high voltage output to the Engine Control Unit (ECU).

How much does it cost to repair a Pontiac P0300?

If the problem persists more tests need to be done to diagnose the problem, see “Possible Causes”. The cost of diagnosing the P0300 PONTIAC code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

What does the P0300 code on a Pontiac mean?

The P0300 code means that a cylinder (s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are commonly caused by multi-cylinder misfiring.

Can a fuel injector fault be set during a misfire?

In Spark Ignition Direct Injection (SIDI) system applications, if a fuel injector fault DTC is set during a misfire event, the ECM will not re-enable the injector. Need more information on how to fix the P0300 PONTIAC code?