Table of Contents
How do you adjust the parking brake shoes on a C3 Corvette?
Engage a flat screwdriver in to the adjusting screw teeth (through the rotor) and turn the adjusting screw, expanding the shoes, by moving the hand away from the floor (both right & left wheels). You will make an up-and-down lever motion. Adjust until the disc will not move, then back off 10 notches.
What is rear parking brake shoe?
The parking brake shoes, also known as the emergency brake shoes, are the long curved blocks lined with friction material for the parking brakes to function. When the parking brakes are set, the parking brake shoes extend against the brake drum or inside of the rotor to hold the vehicle in place.
Does emergency brake lock back wheels?
In road vehicles, the parking brake, also known as a handbrake or emergency brake (e-brake), is a mechanism used to keep the vehicle securely motionless when parked. In most vehicles, the parking brake operates only on the rear wheels, which have reduced traction while braking.
How do you remove a stuck parking brake?
To release a stuck brake you can do several things. If it is safe to do so, you can try rocking the vehicle back and forth or manually getting under the vehicle to pull the cables. You can also try setting and releasing the brake multiple times in the hopes of knocking the brakes free.
Where do jack stands go on c3 Corvette?
Ideally, you want the jackstands under the siderail where it connects to the cross rail (the jacking point indicated in your owner’s manual and on the instruction label in the jack stowage compartment). Do not jack up a Corvette with a floor jack under the differential.
How do you adjust the parking brake on a 1967 Corvette?
Mandatory Parking Brake Burnishing Procedure.
- With the car on a roll test rolls and rear wheels driven at 50 mph. Apply parking brake until a light drag is felt (10-12 notches on handle).
- Operate for 55-60 seconds.
- Return brake handle to released position.
How do I know if I need new parking brake shoes?
Technical Bulletins
- Inconsistent brake pedal feel. If the rear brakes are drum brakes, the driver may feel vibrations under braking.
- Hand brake feels loose. If the hand brake requires a hard yank to keep the car from rolling off, chances are the brake shoes need replacing.
- Scraping noise while braking.
How to adjust the P-brake shoes on a corvette?
You can also do some adjustment on the cable, but the shoe adjustment really needs to be done first. The cable adjustment is on the cable itself, right smack in the center of the car, underneath. There MAY be some info here somewhere on doing the adjustment for the p-brake shoes….just need to search for it to see….
Where is the parking brake located on a corvette?
KC, remember that the parking brake is INSIDE of the rear brake rotors. Innovative design at the time, but a real pita to work on, and they rarely worked well to start with. The lever used to actually apply the p-brake is just a pivot…not really attached to anything.
How to adjust the emergency brake on a C3 Corvette?
You will need to remove the rear wheels. The adjustment is done thru the front side of the brake rotor…assuming someone has not turned the rotors on the hub the wrong way, and has the hole is blocked. You can also do some adjustment on the cable, but the shoe adjustment really needs to be done first.
When do you need to replace parking brake shoes?
If your car is rolling when in park, or the parking brake light is flashing, then it may mean that your parking brake shoes or electronic parking brake module needs to be replaced. Here’s how to replace them. Turn the ignition switch on without turning the engine on.