What are dental waxes used for?

What are dental waxes used for?

Dental wax’s primary use is to protect the mouth’s sensitive areas such as the gums, lips, and cheeks’ lining. It is usually transparent and unnoticeable when used. While the wax is generally flavorless, some varieties have added flavors like mint, cherry, or bubble gum.

What is dental casting wax?

Dental casting waxes are primarily used in the wax-up technique; this can include sculpturing, build up and inlay work. Different vendors may produce dental casting waxes specifically made for certain applications. Solidification point of dental casting wax varies between vendors. …

What are pattern waxes?

Pattern waxes include casting waxes, baseplate wax, and inlay wax. They are used to fabricate a restoration using the lost-wax technique (Figure 10-1). A wax pattern of the restoration is made on a die with a pattern wax (usually inlay wax).

What is an inlay wax?

any soft solid wax used in dentistry for patterns of many types, as well as for other purposes; most are basically paraffin but are modified by addition of gum dammar, carnauba wax, or other ingredients, to meet various requirements.

Can you brush your teeth with dental wax?

Caring for Braces and Dental Wax You can brush your teeth as normal while dental wax is on your braces, but use a toothbrush that cleans the hard-to-reach areas of the mouth. Brush twice per day, taking care not to remove the wax, and use your interdental brush to clean between teeth.

Can I sleep with dental wax?

It’s totally fine to use orthodontic wax overnight, especially if you sleep face down and the braces are more likely to cause irritation to your mouth. If you swallow some wax while you sleep it’s non-toxic and won’t hurt you.

What are the different types of dental wax?

Dental waxes can also be classified in one of three types, pattern wax (inlay, casting, and baseplate types), processing wax (boxing, utility, and sticky types), and impression wax (bite registration and correction types). Casting wax is used for partial denture frameworks and other metal frameworks.

Why do dentists do casting?

It is added to sprue network to prevent localize shrinkage porosity. formers are used. tapering walls. As the investment sets the investment is tapped out of ring.

What are the ideal requirements of inlay pattern wax?

The most important properties of inlay waxes are as follows:

• The wax should be uniform when softened.
• The color should contrast with die materials or prepared teeth.
• The wax should not fragment into flakes or similar surface particles when it is molded after softening.

What are the types of inlay waxes?

The three types of inlay waxes differ in terms of melting point and flow: The essential ingredients of a successful inlay wax are paraffin wax, gum dammar and car- nauba wax with some coloring material.

What is inlay wax made of?

The essential ingredients of a successful inlay wax are paraffin wax, gum dammar and car- nauba wax with some coloring material. Paraffin wax is generally the main ingredient, usually in a concentration of 40-60%. Gum dammar is added to the paraffin to improve the smoothness in the molding.

What do you mean by lost wax technique?

Lost-wax process, also called cire-perdue, method of metal casting in which a molten metal is poured into a mold that has been created by means of a wax model. Once the mold is made, the wax model is melted and drained away.

What kind of wax is used for dental wax?

Although beeswax is still used today, modern waxes are made from natural plant and animal sources. Paraffin that is used for type I inlay waxes has a higher melting point than the paraffin used for type II waxes 1.

Where can I find wax patterns for dentures?

1. CONTENTS  Introduction  Prerequisites  Material sciences  Technique  Armamentarium  Waxing instruments  Posterior teeth  Anterior teeth  Waxing for metal ceramic crowns.  Conclusion 2.

How to apply wax wire to dental crowns?

Crowns and bridges are sprued directly with a 2.5 to 3 mm wax wire (without corners and edges) at a 45 to 60 ° angle to the mold cavity former. Place sprues on the thickest area of the pattern.

What kind of wax is used for casting?

 According to ADA no 4 it is of two types:-  Type I-a medium wax (generally used with the direct technique for making patterns in the oral cavity)  Type II-a softer wax (generally used for the indirect fabrication of castings)  Waxes used with direct techniques must not flow appreciably at mouth temperature.